A-Z index

SNAP® 2709 is a low MFFT acrylic emulsion with a morphology specifically designed to allow an excellent film formation. It is particularly adapted to the formulation of trim enamels for exterior and interior applications. SNAP® 2709 is formulated without alkylphenolethoxylates or formaldehyde. SNAP® 2709 has been developed to be used as binder for both interior and exterior trim enamels. Its specific & controlled structure ensures a stable minimum film formation temperature as well as a very good film formation with no coalescing agent even at low temperatures. In terms of film properties, SNAP® 2709 allows to get a coating exhibiting a good compromise of flexibility and hardness and a very good block resistance. The final properties of the coating are achieved extremely rapidly (within 24 hours of drying) and are stable with time as no coalescing agent (VOC or non VOC) is used. SNAP® 2709 is a binder of choice for durable exterior coatings.

Binder that offers outstanding block resistance in low or zero VOC high-gloss coatings, and is an excellent choice for low odor systems.

SUPER GELKYD® 3915 WDA 55 is a thixotropic resin, based on urethane-urea technology and has been developed for imparting thixotropy into interior and exterior decorative coatings. The resin is supplied in low aromatic high flash white spirit to enable the formulation of coatings that do not require adverse environmental labelling. SUPER GELKYD® 3915 WDA 55 should be used at levels between 15 & 50% calculated on total solid binder to achieve a wide range of thixotropy ranging from slightly structured to full gel. It is suitable for use in all types of interior and exterior solvent based decorative coatings. High quality alkyds thinned in low aromatic high flash solvent should be used in combination with SUPER GELKYD® 3915 WDA 55 to maximise the advantages of the low aromatic solvent.

SUPER GELKYD® 3920 WDA 49 is a urethane - urea modified thixotropic alkyd that has been developed for use in decorative coatings, especially exterior woodstains. It can be used as sole binder for high structured systems and in combination with long or medium oil alkyds. The resin is supplied in low aromatic high flash white spirit to enable the formulation of coatings that do not require adverse environmental labelling. SUPER GELKYD® 3920 WDA 49 can be formulated with polar solvents, alkyds (whatever their polarity) and a wide range of difficult pigments, which are not compatible with polyamide-based products.

SUPER GELKYD® 4743 WP 90 is a high solids thixotropic resin, based on urethane-urea technology and has been developed for imparting thixotropy to interior and exterior decorative coatings. SUPER GELKYD® 4743 WP 90 is supplied in isoparaffinic solvent to enable the formulation of low odour coatings that do not require adverse environmental labelling; it is designed for use in the formulation of decorative paints and woodstains that meet the 2010 VOC limits set in European Directive 2004/42/CE. SUPER GELKYD® 4743 WP 90 is highly thixotropic and should be used in combination with a high solids alkyd, at levels between 15 & 50% calculated on total solid binder to achieve a wide range of thixotropy ranging from slightly structured to full gel.

SUPER GELKYD® 6006 WDA 55 is a highly structured thixotropic flexible resin, based on urethane-urea technology and has been especially developed for imparting thixotropy into exterior, highly durable decorative coatings. The resin is supplied in low aromatic high flash white spirit to enable the formulation of coatings that do not require adverse environmental labelling. SUPER GELKYD® 6006 WDA 55 should be used at levels between 15 & 50% calculated on total solid binder to achieve a wide range of thixotropy ranging from slightly structured to full gel. It is suitable for use in all types of exterior solvent-based decorative coatings. It is especially recommended for use in combination with the flexible alkyd SYNOLAC® 6005 WDA 70 to produce extremely durable exterior coatings.

SUPER GELKYD® 6008 WD 45 is a pumpable thixotropic alkyd especially designed for use in high durability exterior coatings. It combines the proven durability of SYNOLAC® 6005 WDA 70 with the rheological control of the SUPER GELKYD® technology. The result is a flexible thixotropic resin supplied in bulk that can be used as sole binder or alternatively blended with SYNOLAC® 6005 WDA 70. The resin is supplied in low aromatic white spirit to enable the formulation of coatings that do not require adverse environmental labelling. SUPER GELKYD® 6008 WD 45 can be formulated with polar solvents, alkyds (whatever their polarity) and a wide range of difficult pigments, which are not compatible with polyamide-based products. The resin is primarily recommended for use in thixotropic exterior decorative coatings woodstains, where it may be incorporated as the major proportion of the binder according to the structure required.

SYNAQUA® 2070 is a medium oil alkyd emulsion designed for use in decorative paints. SYNAQUA® 2070 has been developed primarily for use in interior undercoats formulations. However, it is also suitable for other applications such as matt paints, exterior primers for wood, woodstains or metal and corrosion resistant primers. SYNAQUA® 2070 is designed to get coatings with similar application properties to solvent based alkyds but with low VOC in the finished product, with an improved wet-edge time. SYNAQUA® 2070 does not contain any alkylphenolethoxylates nor amines.

SYNAQUA® 2080 is a short oil alkyd emulsion designed for use in high performance decorative paints. SYNAQUA® 2080 is suitable for the formulation of low to zero-VOC wall paints and might be used in the formulation of trim paints. SYNAQUA® 2080 is formulated without alkylphenolethoxylates, and is ammonia-, solvent- and plasticizer- free.

SYNAQUA® 2090 is a short oil alkyd emulsion designed to be formulated without Cobalt drier. SYNAQUA® 2090 has been developped for the formulation of high gloss and semi-gloss wall and trim paints. SYNAQUA® 2090 is formulated without alkylphenolethoxylates, and is ammonia-, solvent- and plasticizer- free.

SYNAQUA® 2350 EP 60 is a highly flexible acrylated epoxy ester. It can be used in both water-dilutable or solvent-based 1K systems (curing at room temperature or stoving, with or without the presence of amino resins). SYNAQUA® 2350 EP 60 is recommended for use in both industrial primers and topcoats.

SYNAQUA® 3510 SW 80 is an after neutralisation water-reducible, saturated, hydroxyfunctional, modified polyester, designed especially for cross-linking with water emulsifiable polyisocyanates. Finished coatings particularly show an excellent film surface comparable with the well-known quality of solvent based 2K-PU coatings. Additionally the mechanical characteristics and durability are also comparable. SYNAQUA® 3510 SW 80 is suitable to formulate high gloss, flexible finish coatings with less than 5% VOC. Favourably such paints can safely be worked on all commonly used modern coating equipment. SYNAQUA® 3510 SW 80 is particularly recommended for use in high gloss 2-pack-coatings for industrial application. It is also suitable for primers and single coat paints. The high durability and long pot life give the opportunity for coating large vehicles. Even for wood coating these characteristics can be exploited using corresponding formulations.

SYNAQUA® 4804 is a short oil alkyd emulsion designed for use in high performance decorative paints. SYNAQUA® 4804 has been developed primarily for trim paints. The properties of the emulsion make it also suitable for other applications such as wall paints, exterior primers for wood or metal, direct to metal and corrosion resistant primers. SYNAQUA® 4804 is formulated without alkylphenolethoxylates, and is ammonia-, solvent- and plasticiser- free.

SYNAQUA® 4804 NA is a short oil alkyd emulsion designed for high performance low yellowing decorative coatings. SYNAQUA® 4804 NA is low VOC capable but provides performance similar to solvent-based alkyds. It is dedicated to interior and exterior trim paints, interior wall paints andmetal primers. SYNAQUA® 4804 NA is APEO-, ammonia-, solvent- and plasticizer- free

SYNAQUA® 4856 is a highly bio-based alkyd emulsion. It is particularly dedicated for the formulation of low VOC and low emissive interior wall paints from matte to glossy. SYNAQUA® 4856 offers a good wet scrub resistance, a good hardness and a high gloss potential. SYNAQUA® 4856 is formulated without alkylphenolethoxylates, and is ammonia- and plasticiser- free.

SYNAQUA® 5120 BG 72 is an alcali-soluble short oil alkyd resin based on drying vegetables fatty acids, specially suited to combine with HMMM resins. SYNAQUA® 5120 BG 72 is a resin recommended in combination with water reducible amino resins for the formulation of industrial primers and enamels for stoving systems.

SYNAQUA® 6812 is a self emulsifying long oil alkyd resin designed for use in water based decorative coatings, in combination with (styrene-)acrylic or vinylic emulsions. SYNAQUA® 6812 is to be used as co-binder in the formulation of 2010 VOC compliant paints and primers (according to the European Directive 2004/42/CE) in combination with (styrene-) acrylic or vinylic emulsions. In matt paints and primers, it can substitute up to 30% of the (styrene-) acrylic or vinylic binder. In lower PVC paints, the level should not exceed 10% to 20%. SYNAQUA® 6812 does not contain any solvent, amines nor alkylphenolethoxylates.

SYNAQUA® 811 S 48 is an aqueous solution of a high molecular weight acrylic polymer, developed for use in water-soluble stoving systems. When used at low concentrations, it is effective in eliminating cissing and a related effect in deposited films, and is particularly recommended where water based coatings are applied to slightly greasy surfaces.

SYNAQUA® 9511 is an acrylic polyol emulsion designed for 2K and for 1K stoving systems. It can be used for plastic and metal applications.

SYNOCRYL® 806S-70 is hydroxyl functional thermosetting flexible acrylic resin. SYNOCRYL® 806S-70 is a thermosetting hydroxylated acrylic copolymer for combination with amino resins. Suitable for Basecoat for wet on wet systems especially automotive topcoats. Good compatibility with cellulose acetate-butyrate resins.

SYNOCRYL® 816N-70 is hydroxyl functional thermosetting acrylic resin developed for use in wet on wet application of auto body topcoats and lacquers. SYNOCRYL® 816N-70 is recommended for the development of the acrylic based OEM, General Industrial and vehicle refinish lacquers or paints having excellent overall performance. Particular performance characteristics achieved with SYNOCRYL® 816N-70 include:

SYNOCRYL® 826S-60 IN is hydroxyl functional thermosetting acrylic resin developed for use in low bake stoving system for auto body paints and lacquers. SYNOCRYL® 826S-60 IN is recommended for the development of the acrylic based General Industrial, OEM and vehicle refinish lacquers or paints having excellent overall performance.

SYNOCRYL® 829S-60 is hydroxyl functional thermosetting acrylic resin developed for use in low bake stoving system for auto body paints and lacquers. SYNOCRYL® 829S-60 is recommended for the development of the acrylic based OEM, Industrial and vehicle refinish applications having excellent Petrol and oil resistance. Particular performance characteristics achieved with SYNOCRYL® 829S-60 include:

SYNOCRYL® 846S-60 is hydroxyl functional thermosetting CAB compatible acrylic resin. SYNOCRYL® 846S-60 is a thermosetting hydroxylated acrylic copolymer for crosslinking with amino resins. Suitable for Basecoat for wet on wet systems especially automotive topcoats. Good compatibility with cellulose acetate-butyrate resins.

SYNOCRYL® 873S-45 is a thermoplastic acrylic copolymer possessing the excellent color, gloss retention and good adhesion to plastics, metals, wood and fabrics are the properties of resin.

SYNOCRYL® 874 X 50 MY is a thermoplastic acrylic copolymer possessing the excellent colour, gloss retention and exterior durability properties typical of this class of resin. The acrylic monomers used in the manufacture of SYNOCRYL® 874 X 50 MY were selected to provide hard and tough films, yet with sufficient plasticising character to maintain flexibility. The versatility of SYNOCRYL® 874 X 50 MY enables it to be used in a variety of finishes, either as the sole vehicle in clear or pigmented coatings for metal, wood, plastic and fabrics or as a modifying resin to improve the drying time, durability and resistance properties of other coating systems. Water white films are deposited from the resin, and clear or pigmented films possess fast air dry times and are resistant to soaps and detergents. The films are also resistant to degradation when exposed to heat or ageing. They are far superior to chlorinated rubber based systems in terms of colour retention.

SYNOCRYL® 874N-40 IN is a thermoplastic acrylic copolymer possessing the excellent color, gloss retention and good adhesion to plastics, metals, wood and fabrics are the properties of resin.

SYNOCRYL® 874X-45 is a thermoplastic acrylic copolymer possessing the excellent color, gloss retention and good adhesion to plastics, metals, wood and fabrics are the properties of resin.

SYNOCRYL® 9122X-40 IN is a solution of a thermoplastic acrylic polymer used in a variety of specialized air drying and force drying finishes.

SYNOCRYL® 9130 X 55 is a thermoplastic acrylic resin with an excellent adhesion over many different metallic substrates like steel, galvanised steel, brass, aluminium… SYNOCRYL® 9130 X 55 is recommended for primers and monolayer paints with good adhesion over light industrial metals and galvanised steel exhibiting good outdoor resistance. It is also suitable for maintenance paints with good adhesion over many differing metallic substrates and plastics.Additionally, SYNOCRYL® 9130 X 55 can also be an excellent alternative to medium oil alkyds for metal decoration, especially in the case of galvanised steel substrates.

SYNOCURE® 210 BA 40 is designed for use in extremely fast drying coatings for industrial wood finishing. SYNOCURE® 210 BA 40 is specifically adapted to use in varnishes for industrial furniture finishing. SYNOCURE® 210 BA 40 quickly achieves a good blocking resistance and in spite of its relatively low hydroxyl value provides a good resistance to household chemicals. In combination with aliphatic polyisocyanates like Desmodur® N series (1) the coating film shows excellent drying and hardness without using CAB in the formulation.

SYNOCURE® 213 BA 50 is a fast drying, hydroxy functional acrylic resin designed to crosslink with polyisocyanates under ambient or force dry conditions. SYNOCURE® 213 BA 50 is specifically adapted to use in varnishes for industrial furniture finishing. SYNOCURE® 213 BA 50 quickly achieves a good blocking resistance and in spite of its relatively low hydroxyl value provides a good resistance to household chemicals.

SYNOCURE® 225 BA 50 is a hydroxy functional acrylic resin supplied in butyl acetate that will allow the formulation of aromatic-free systems. SYNOCURE® 225 BA 50 is particularly recommended for fast drying wood coatings but also suitable for industrial finishes and primers. SYNOCURE® 225 BA 50 is especially suitable for coatings in the furniture industry exhibiting excellent chemical resistance and mechanical properties. SYNOCURE® 225 BA 50 exhibits a faster hardening rate than similar resins resulting in early blocking resistance of the applied films under ambient or force dry conditions without compromising the good flexibility. The long pot life of the prepared mixture offers easy processing on all types of industrial coating equipment.

SYNOCURE® 225 BA 50 MY is a hydroxy functional acrylic resin supplied in butyl acetate that will allow the formulation of aromatic-free systems. SYNOCURE® 225 BA 50 MY is particularly recommended for fast drying wood coatings but also suitable for industrial finishes and primers. SYNOCURE® 225 BA 50 MY is especially suitable for coatings in the furniture industry exhibiting excellent chemical resistance and mechanical properties. SYNOCURE® 225 BA 50 MY exhibits a faster hardening rate than similar resins resulting in early blocking resistance of the applied films under ambient or force dry conditions without compromising the good flexibility. The long pot life of the prepared mixture offers easy processing on all types of industrial coating equipment.

SYNOCURE® 516 N 60 is a hydroxy functional acrylic resin designed to crosslink at room temperature with polyisocyanates. SYNOCURE® 516 N 60 is particularly well suited for use in high quality industrial coatings. The excellent adhesion properties make the resin a good choice for primers, fillers and single coat paints for a variety of substrates. Steel, galvanised steel, aluminium, wood, plastic and minerals can all be coated satisfactorily using coatings based on SYNOCURE® 516 N 60. SYNOCURE® 516 N 60 has particularly good resistance properties to solvents and chemicals and to exposure to weather and UV light, making it suitable for high quality anticorrosive protection and for long life decorative coatings, especially on structural steelwork.

SYNOCURE® 542 X 55 is a hydroxy functional acrylic resin designed to crosslink at room temperature with polyisocyanates, and is particularly recommended where economy in use is a major factor.

SYNOCURE® 561 X 60 is a hydroxyl functional acrylic resin designed to crosslink at room temperature with polyisocyanates. SYNOCURE® 561 X 60 has particularly good resistance properties to solvents, suitable for anti-corrosive protection and for long life decorative coatings, especially on structural steelwork.

SYNOCURE® 570 X 65 is a hydroxyl functional acrylic resin developed for use in two component systems when cured with polyisocyanate. SYNOCURE® 570 X 65 is recommended for the formulations, and is particularly recommended where higher application solids and excellent exterior durability is required.

SYNOCURE® 589 S 75 is a high solids hydroxy functional acrylic resin suitable for the formulation of high build low VOC (below 420 g/l at spray viscosity) two-component coatings, both solid colours and clearcoats. SYNOCURE® 589 S 75 is recommended for high performance protective and marine finishes, A.C.E., transport and vehicle refinishing.

SYNOCURE® 7120 S 50 is a hydroxy acrylic resin crosslinkable with polyisocyanates. SYNOCURE® 7120 S 50 has been developed to be used in varnishes and lacquers for furniture performing fast drying and hardening even with aliphatic polyisocyanates. SYNOCURE® 7120 S 50 provides in blend with aliphatic polyisocyanates yellowing resistance films and therefore is suitable to be used in white lacquers for kitchen cabinet. SYNOCURE® 7120 S 50 permits the formulation of clear glossy finishes with excellent polishing.

SYNOCURE® 7715 S 60 is an hydroxy acrylic resin to be crosslinked with polyisocyanates with good adhesion on different metallic and plastic substrates (steel, galvanised steel, aluminium, tinplate, ABS, PVC, polyamide, etc.) SYNOCURE® 7715 S 60 is a resin specially designed for the formulation of varnishes and enamels exhibiting a very fast drying in combination with aliphatic isocyanates.

SYNOCURE® 801S-60 is a hydroxyl functional acrylic resin developed for use in compliant two component systems when cured with polyisocyanate. SYNOCURE® 801S-60 is recommended for the formulations, which are cross-link at room temperature or force dried with poly isocyanate and is particularly recommended where weatherability is a major factor.

SYNOCURE® 802N-70 is a hydroxyl functional acrylic resin developed for use in compliant two component systems when cured with polyisocyanate. SYNOCURE® 802N-70 is low hydroxyl fast drying acrylic recommended for the formulations of general industrial applications.

SYNOCURE® 803X-65 is a hydroxyl functional acrylic resin developed for use in compliant two component systems when cured with polyisocyanate.

SYNOCURE® 804X-70 is a hydroxyl functional acrylic designed to crosslink at room temperature or under low-bake conditions with aliphatic polyisocyanate. It is particularly recommended for use in OEM’s, vehicle refinishing, A.C.E. and transport coatings and heavy duty coatings.

SYNOCURE® 810X-60 is a hydroxyl functional acrylic resin developed for use in compliant two component systems when cured with polyisocyanate. SYNOCURE® 810X-60 is recommended for the formulations, which are cross-link at room temperature or force dried with poly isocyanate and is particularly recommended for general industrial and vehicle refinish applications.

SYNOCURE® 815S-65 is a hydroxyl functional acrylic resin developed for use in compliant two component systems when cured with polyisocyanate. Fast drying acrylic with high hardness suitable for wood, plastics, vehicle refinish & GI primer, clear & topcoats.

SYNOCURE® 851 S 60 is a hydroxy functional acrylic designed to crosslink at room temperature or under low-bake conditions with aliphatic polyisocyanates. SYNOCURE® 851 S 60 is particularly recommended for use in vehicle refinishing, and for all high performance industrial applications where high quality is required.

SYNOCURE® 851S-60 IN is a hydroxy functional acrylic designed to crosslink at room temperature or under low-bake conditions with aliphatic polyisocyanates. SYNOCURE® 851S-60 IN is particularly recommended for use in OEM, vehicle refinishing, and for all high performance industrial applications where high quality is required.

SYNOCURE® 852S-75 is a hydroxy functional acrylic designed to crosslink at room temperature or under low-bake conditions with aliphatic polyisocyanates. SYNOCURE® 852S-75 is particularly recommended for use in vehicle refinishing, and for all high performance industrial applications where high quality is required.

SYNOCURE® 853 BA 80 is a high solids hydroxy functional acrylic resin designed for curing at both room temperature and under low bake conditions with suitable polyisocyanates. Ease of application, initial gloss and appearance make them suitable for many applications including ACE and general metal coatings. Coatings based on SYNOCURE® 853 BA 80 are faster drying than most other high solids types. The high solids/low viscosity character of SYNOCURE® 853 BA 80 allows low VOC coatings to be formulated even with conventional polyisocyanates. Depending upon formulation <420g/l at 23 seconds and <350g/l at 45 seconds are possible.

SYNOCURE® 854 BA 80 is a high solids hydroxy functional acrylic resin designed for curing at room temperature with suitable polyisocyanates. Suggested applications are protective, marine and maintenance coatings.

SYNOCURE® 854 BA 80 MY is a high solids hydroxy functional acrylic resin designed for curing at room temperature with suitable polyisocyanates. Suggested applications are protective, marine and maintenance coatings.

SYNOCURE® 857 X 60 is a hydroxy functional acrylic resin designed to crosslink at room temperature with polyisocyanates, and is particularly recommended where economy in use is a major factor.

SYNOCURE® 857S-60 is a hydroxyl functional acrylic resin developed for use in compliant two component systems when cured with polyisocyanate. SYNOCURE® 857S-60 is recommended for the formulations, where economy in use is a major factor. Excellent flexibility is a key feature of SYNOCURE 857S-60.

SYNOCURE® 861 X 55 is a hydroxy functional acrylated polyester designed for crosslinking at both room temperature and low stoving temperatures with suitable polyisocyanates. SYNOCURE® 861 X 55 is primarily intended for use in vehicle refinishing applications, both as a medium for excellent primer surfacers and for finishing coats.

SYNOCURE® 862 X 60 is a hydroxy functional acrylic resin designed to crosslink at room temperature with polyisocyanates, and is particularly recommended where economy in use is a major factor.

SYNOCURE® 862 X 60 HV is a hydroxy functional acrylic resin designed to crosslink at room temperature with polyisocyanates, and is particularly recommended where economy in use is a major factor.

SYNOCURE® 862 X 60 MY is a hydroxy functional acrylic resin designed to crosslink at room temperature with polyisocyanates, and is particularly recommended where economy in use is a major factor.

SYNOCURE® 862X-55 IN is a hydroxyl functional acrylic resin developed for use in compliant two component systems when cured with polyisocyanate. SYNOCURE® 862X-55 IN is recommended for the formulations, where economy in use is a major factor.

SYNOCURE® 864 N 60 is a low hydroxy functional acrylic resin designed to crosslink at room temperature with polyisocyanates, and is particularly recommended where economy in use is a major factor, which is achieved through low isocyanate demand. SYNOCURE® 864 N 60 has excellent resistance to weathering so is particularly suited to low cost protective coating topcoats

SYNOCURE® 865-70 is a hydroxyl functional acrylic resin developed for use in compliant two component systems when cured with polyisocyanate. SYNOCURE® 865-70 is recommended for the formulations, which are cross-link at room temperature with polyisocyanate and is particularly recommended where higher application solids and excellent exterior durability is required.

SYNOCURE® 865 EEP 70 is a hydroxy functional acrylic resin developed for use in two component systems requiring higher application solids. SYNOCURE® 865 EEP 70 has exceptional resistance to exposure to weather and UV light. Coatings based on SYNOCURE® 865 EEP 70 have excellent durability and gloss retention, a feature normally associated with higher hydroxyl content acrylics which are consequently more expensive to use. It is particularly suitable to high quality topcoats for Protective coatings also ACE and Vehicle Refinishing.

SYNOCURE® 866 EEP 75 is a high solids content hydroxy functional acrylic resin developed for use in compliant two component systems when cured with polyisocyanate. SYNOCURE® 866 EEP 75 is particularly well suited for use in high quality industrial coatings with good gloss and DOI. Such coatings also have exceptional exterior durability and gloss retention and are suitable for vehicle refinish, ACE or protective coatings.

SYNOCURE® 866 EEP 75 MY is a high solids content hydroxy functional acrylic resin developed for use in compliant two component systems when cured with polyisocyanate. SYNOCURE® 866 EEP 75 MY is particularly well suited for use in high quality industrial coatings with good gloss and DOI. Such coatings also have exceptional exterior durability and gloss retention and are suitable for vehicle refinish, ACE or protective coatings.

SYNOCURE® 867 BA 60 is a hydroxy functional acrylic designed to crosslink at room temperature with polyisocyanates. SYNOCURE® 867 BA 60 is especially recommended for coatings where outdoor durability and resistant properties are of prime importance.

SYNOCURE® 867 BA 60 MY is a hydroxy functional acrylic designed to crosslink at room temperature with polyisocyanates. SYNOCURE® 867 BA 60 MY is especially recommended for coatings where outdoor durability and resistant properties are of prime importance.

SYNOCURE® 867 S 57 is a hydroxy functional acrylic resin designed to crosslink at room temperature with polyisocyanates.

SYNOCURE® 867 S 57 MY is a hydroxy functional acrylic resin designed to crosslink at room temperature with polyisocyanates.

SYNOCURE® 867BA-60 IN is a hydroxy functional acrylic designed to crosslink at room temperature with polyisocyanates. SYNOCURE® 867BA-60 IN is especially recommended for coatings where outdoor durability and resistant properties are of prime importance

SYNOCURE® 867S-60 is a hydroxyl functional acrylic resin developed for use in compliant two component systems when cured with polyisocyanate. SYNOCURE® 867S-60 is recommended for the formulations, which are cross-link at room temperature or force dried with poly isocyanate and is particularly recommended where excellent all round performance is required.

SYNOCURE® 867SD-57 is a hydroxyl functional acrylic resin developed for use in compliant two component systems when cured with polyisocyanate. SYNOCURE® 867SD-57 is recommended for the formulations, which are cross-link at room temperature or force dried with poly isocyanate and is particularly recommended where excellent all round performance is required.

SYNOCURE® 868S-60 IN is a hydroxyl functional acrylic resin developed for use in compliant two component systems when cured with polyisocyanate. SYNOCURE® 868S-60 IN is CAB compatible acrylic recommended for the formulations, which are cross-link at room temperature or force dried with poly isocyanate and is particularly recommended where highly flexible coating is required.

SYNOCURE® 869 X 52 is a hydroxy functional acrylic resin designed to crosslink at room temperature with polyisocyanates to produce coatings with outstanding colour retention and good chemical resistance. SYNOCURE® 869 X 52 is suitable for use in wood lacquers and high performance coatings for metal.

SYNOCURE® 870S-60 is a hydroxyl functional acrylic resin developed for use in compliant two component systems when cured with polyisocyanate. SYNOCURE® 870S-60 is recommended for the formulations, which are cross-link at room temperature or force dried with poly isocyanate and is particularly recommended where excellent all-round performance is required.

SYNOCURE® 871 X 60 is a hydroxy functional acrylic resin designed to crosslink with polyisocyanates at room temperature. Paints and lacquers based on SYNOCURE® 871 X 60 are particularly suitable for coating plastic substrates.

SYNOCURE® 878 N 60 is a hydroxy functional acrylic resin designed to crosslink at room temperature with polyisocyanates. SYNOCURE® 878 N 60 is particularly well suited for use in high quality industrial coatings. The excellent adhesion properties make the resin a good choice for primers, fillers and single coat paints for a variety of substrates. Steel, galvanised steel, aluminium, wood, plastic and minerals can all be coated satisfactorily using coatings based on SYNOCURE® 878 N 60. SYNOCURE® 878 N 60 has good resistance properties to solvents and chemicals and to exposure to weather and UV light, making it suitable for high quality anti-corrosive protection and for long life decorative coatings, especially on structural steelwork.

SYNOCURE® 878 N 60 MY is a hydroxy functional acrylic resin designed to crosslink at room temperature with polyisocyanates. SYNOCURE® 878 N 60 MY is particularly well suited for use in high quality industrial coatings. The excellent adhesion properties make the resin a good choice for primers, fillers and single coat paints for a variety of substrates. Steel, galvanised steel, aluminium, wood, plastic and minerals can all be coated satisfactorily using coatings based on SYNOCURE® 878 N 60 MY. SYNOCURE® 878 N 60 MY has good resistance properties to solvents and chemicals and to exposure to weather and UV light, making it suitable for high quality anti-corrosive protection and for long life decorative coatings, especially on structural steelwork.

SYNOCURE® 878N-60 IN is a hydroxyl functional acrylic resin developed for use in compliant two component systems when cured with polyisocyanate. SYNOCURE® 878N-60 IN is recommended for the formulations, which are cross-link at room temperature with poly isocyanate and is particularly recommended where weatherability is a major factor.

SYNOCURE® 885 S 70 is an acrylic resin with functional acid groups capable of crosslinking with an epoxy hardener to produce high build isocyanate free two-pack coating systems. SYNOCURE® 885 S 70 is designed for use in vehicle refinishing, maintenance enamels or protective top-coats. Used with epoxy hardener (typical aliphatic multifunctional epoxy resins such as those based on sorbitol), excellent solvent resistance to facilitate recoating and spot repair can be achieved. High build finishes are a particular feature of paints based on this resin.

SYNOCURE® 886 S 70 is an acid functional acrylic resin designed to crosslink at room temperature with epoxy resins to give high solids content isocyanate-free two-pack coating systems. Coatings based on this resin are especially suitable for protection and maintenance in areas where rapid drying, hardness and abrasion resistance are required. SYNOCURE® 886 S 70 has been designed to react with economic bisphenol A type epoxies and still maintain good exterior durability.

SYNOCURE® 886 S 70 MY is an acid functional acrylic resin designed to crosslink at room temperature with epoxy resins to give high solids content isocyanate-free two-pack coating systems. Coatings based on this resin are especially suitable for protection and maintenance in areas where rapid drying, hardness and abrasion resistance are required. SYNOCURE® 886 S 70 MY has been designed to react with economic bisphenol A type epoxies and still maintain good exterior durability.

SYNOCURE® 887X-70 is a hydroxyl functional acrylic resin developed for use in compliant two component systems when cured with polyisocyanate. SYNOCURE® 887X-70 is low hydroxyl fast drying acrylic recommended for the formulations of general industrial applications.

SYNOCURE® 888X-60 is a hydroxyl functional acrylic resin developed for use in compliant two component systems when cured with polyisocyanate. SYNOCURE® 888X-60 is recommended for the formulations, which are cross-link at room temperature or force dried with poly isocyanate and is particularly recommended where excellent all round performance is required.

SYNOCURE® 890 S 55 is an acid functional acrylic resin for use with the epoxy copolymer curing agents SYNOCURE® 899 BA 60 or SYNOCURE® 899 BA 70 LM in isocyanate-free two pack coating systems. Two pack coating systems based on SYNOCURE® 890 S 55 are especially suitable for transport vehicles, agricultural equipment and high quality maintenance coatings.

SYNOCURE® 892 BA 70 is an multifunctional acrylic resin for use with the epoxy acrylic copolymer curing agent SYNOCURE® 899 BA 70 LM in high quality 2-component isocyanate-free industrial coatings. SYNOCURE® 892 BA 70 is recommended for the formulation of protective coatings, transport and agricultural paints and high quality maintenance finishes. SYNOCURE® 892 BA 70 / SYNOCURE® 899 BA 70 LM based coatings will exhibit significantly higher solids and film build than the well-proven SYNOCURE® 890 S 55 /SYNOCURE® 899 BA 60 system.

SYNOCURE® 895 S 55 is a flexible acid functional acrylic resin for use with the epoxy copolymer curing agents SYNOCURE® 899 BA 60 or SYNOCURE® 899 BA 70 LM in isocyanate-free two pack coating systems. Two pack coating systems based on blends of SYNOCURE® 890 S 55 and SYNOCURE® 895 S 55 are especially suitable for transport vehicles, agricultural equipment and high quality maintenance coatings.

SYNOCURE® 899 BA 60 is an epoxy acrylic copolymer curing agent designed specifically for use with the Arkema range of SYNOCURE® acid and amine functional acrylic resins for the formulation of high quality isocyanate free 2-component industrial coatings. This combination produces fast drying two pack coating systems for high durability enamels suitable for heavy duty, maintenance and transport applications.

SYNOCURE® 899 BA 70 LM is a high solids content epoxy acrylic copolymer curing agent designed specifically for use with the Arkema range of SYNOCURE® acid and amine functional acrylic resins for the formulation of high quality isocyanate-free 2-component industrial coatings. SYNOCURE® 899 BA 70 LM is a lower molecular weight variant of SYNOCURE® 899 BA 60. When used in combination with the regular solids acrylics, SYNOCURE® 890 S 55 and SYNOCURE® 895 S 55, benefits of improved solids and reduced VOC can be achieved.

SYNOCURE® 9201 S 75 is a high solid hydroxy functional acrylic designed to crosslink at room temperature or forced air drying with aliphatic polyisocyanates. SYNOCURE® 9201 S 75 is particularly recommended for all high performance industrial applications where high performance is required including vehicle refinishing.

SYNOCURE® 9201 S 75 MY is a high solid hydroxy functional acrylic designed to crosslink at room temperature or forced air drying with aliphatic polyisocyanates. SYNOCURE® 9201 S 75 MY is particularly recommended for all high performance industrial applications where high performance is required including vehicle refinishing.

SYNOCURE® 9203 S 52 is a hydroxy functional acrylic designed to crosslink at room temperature or under low-bake conditions (60°C-80°C) with aliphatic polyisocyanates. SYNOCURE® 9203 S 52 is particularly recommended for use in vehicle refinishing, A.C.E. and transport coatings.

SYNOCURE® 9206 S 65 is a medium solid hydroxy functional acrylic designed to crosslink at room temperature or forced air drying with aliphatic polyisocyanates. SYNOCURE® 9206 S 65 is particularly recommended for all high performance industrial applications, clear coat or top coat for protective coating, general industry and car refinish colored top coat.

SYNOCURE® 9207 S 60 is a hydroxy functional acrylic designed to crosslink at room temperature or forced air drying with aliphatic polyisocyanates. SYNOCURE® 9207 S 60 is particularly recommended for all high performance industrial applications where fast cure, high crosslinking density and chemical resistance are required.

SYNOCURE® 9212 S 60 is a hydroxy functional acrylic designed to crosslink at room temperature or under low-bake conditions with aliphatic polyisocyanates. SYNOCURE® 9212 S 60 is particularly recommended for use in vehicle refinishing, A.C.E. and transport coatings.

SYNOCURE® 9216 X 60 is a hydroxy functional acrylic resin designed to crosslink at room temperature with polyisocyanates. SYNOCURE® 9216 X 60 is particularly well suited for use in high quality industrial coatings. The excellent adhesion properties make the resin a good choice for primers, fillers and single coat paints for a variety of substrates. Steel, galvanised steel, aluminium, wood, plastic and minerals can all be coated satisfactorily using coatings based on SYNOCURE® 9216 X 60. SYNOCURE® 9216 X 60 has good resistance properties to solvents and chemicals and to exposure to weather and UV light, making it suitable for high quality anti-corrosive protection and for long life decorative coatings, especially on structural steelwork.

SYNOCURE® 9226 BA 82 is a hydroxy functional acrylic designed to crosslink at room temperature or forced air drying with aliphatic polyisocyanates. SYNOCURE® 9226 BA 82 is particularly recommended for all high performance industrial applications with a level of COV below 250g/l in paints or varnishes

SYNOCURE® 9228 S 60 9228 S 60 is a hydroxy functional acrylic designed to crosslink at room temperature or forced air drying with aliphatic polyisocyanates. SYNOCURE® 9228 S 60 is particularly recommended for all high performance industrial applications where high performance is required especially vehicle refinishing.

SYNOCURE® 9237 S 70 is a hydroxy functional acrylic resin designed to crosslink at room temperature with polyisocyanates. SYNOCURE® 9237 S 70 is particularly well suited for use in high quality compliant industrial marine coatings, heavy duty and protective coatings such as structural steelwork.

SYNOCURE® 9237 S 70 MY is a hydroxy functional acrylic resin designed to crosslink at room temperature with polyisocyanates. SYNOCURE® 9237 S 70 MY is particularly well suited for use in high quality compliant industrial marine coatings, heavy duty and protective coatings such as structural steelwork.

SYNOCURE® 9237S-70 IN is a hydroxy functional acrylic designed to crosslink at room temperature or under low-bake conditions with aliphatic polyisocyanates. SYNOCURE® 9237S-70 IN is particularly recommended for use in high quality compliant industrial coatings, vehicle refinish applications, heavy duty and protective coatings such as structural steelwork.

SYNOCURE® 9239 BA 65 is a hydroxy functional acrylated polyester designed for crosslinking at both ambient temperature and low stoving temperatures with suitable polyisocyanates. SYNOCURE® 9239 BA 65 is primarily intended for use in vehicle refinishing applications, both as a medium for excellent primer surfacers and for finishing coats. Its properties make also suitable for industrial primers, finishes for transport vehicles, car assembling or rigid plastics.

SYNOCURE® 9256 X 70 is a high solid medium hydroxy functional acrylic designed to crosslink at room temperature or forced air drying with aliphatic polyisocyanates. SYNOCURE® 9256 X 70 is particularly recommended for high performance industrial applications especially where fast drying and tack free time are required.

SYNOCURE® 9256 X 70 MY is a high solid medium hydroxy functional acrylic designed to crosslink at room temperature or forced air drying with aliphatic polyisocyanates. SYNOCURE® 9256 X 70 MY is particularly recommended for high performance industrial applications especially where fast drying and tack free time are required.

SYNOCURE® 9260 BA 70 is a high solid hydroxy functional acrylic designed to crosslink at room temperature or forced air drying with aliphatic polyisocyanates. SYNOCURE® 9260 BA 70 is particularly recommended for use in vehicle refinishing, and for all high performance industrial applications where high performance is required.

SYNOCURE® 9266 BA 75 is a high solid hydroxy functional acrylic designed to crosslink at room temperature or under low-bake conditions with aliphatic polyisocyanates. Good overall performances.

SYNOCURE® 9277 S 65 is a hydroxy functional acrylic designed to crosslink at room temperature or under low-bake conditions with aliphatic polyisocyanates. It is particularly recommended for use in vehicle refinishing, A.C.E., Transport coatings and Heavy Duty Coatings.

SYNOCURE® 9277 S 65 MY is a hydroxy functional acrylic designed to crosslink at room temperature or under low-bake conditions with aliphatic polyisocyanates. It is particularly recommended for use in vehicle refinishing, A.C.E., Transport coatings and Heavy Duty Coatings.

SYNOCURE® 9278 S 60 is a hydroxy functional acrylic resin designed to crosslink at room temperature with polyisocyanates. SYNOCURE® 9278 S 60 is particularly well suited for use in high quality industrial coatings. The excellent adhesion properties make the resin a good choice for primers, fillers and single coat paints for a variety of substrates. Steel, galvanised steel, aluminium, wood, plastic and minerals can all be coated satisfactorily using coatings based on SYNOCURE® 9278 S 60. SYNOCURE® 9278 S 60 has good resistance properties to solvents and chemicals and to exposure to weather and UV light, making it suitable for high quality anticorrosive protection and for long life decorative coatings, especially on structural steelwork.

SYNOCURE® 9279 S 65 is a hydroxy functional acrylic designed to crosslink at room temperature or under low-bake conditions with aliphatic polyisocyanates. It is particularly recommended for use in vehicle refinishing, A.C.E., Transport coatings and Heavy Duty Coatings.

SYNOCURE® 9279 S 70 is a hydroxy functional acrylic designed to crosslink at room temperature or under low-bake conditions with aliphatic polyisocyanates. It is particularly recommended for use in vehicle refinishing, A.C.E., Transport coatings and Heavy Duty Coatings.

SYNOCURE® 9291 BA 75 is a high solid hydroxy functional acrylic resin designed to crosslink at room temperature with polyisocyanates. SYNOCURE® 9291 BA 75 is particularly well suited for use in high quality industrial coatings top coat and clear coat. SYNOCURE® 9291 BA 75 has good resistance properties to solvents and chemicals and to exposure to weather and UV light, making it suitable for high quality anti-corrosive protection and for long life heavy duty coating.

SYNOCURE® 9291 BA 75 MY is a high solid hydroxy functional acrylic resin designed to crosslink at room temperature with polyisocyanates. SYNOCURE® 9291 BA 75 MY is particularly well suited for use in high quality industrial coatings top coat and clear coat. SYNOCURE® 9291 BA 75 MY has good resistance properties to solvents and chemicals and to exposure to weather and UV light, making it suitable for high quality anti-corrosive protection and for long life heavy duty coating.

SYNOCURE® 9293 BA 70 is a high solid hydroxy functional acrylic designed to crosslink at room temperature or forced air drying with aliphatic polyisocyanates. SYNOCURE® 9293 BA 70 is particularly recommended for use in vehicle refinishing, ACE (Agricultural, Construction, Earth-moving equipment), protective coating and for all high performance industrial applications where high performance is required.

SYNOCURE® 9294 BA 70 is a high solid hydroxy functional acrylic designed to crosslink at room temperature or forced air drying with aliphatic polyisocyanates. Suggested applications are protective, marine and maintenance coatings.

SYNOCURE® 9299 BA 70 is a hydroxy functional acrylic designed to crosslink at room temperature or forced air drying with polyisocyanates. SYNOCURE® 9299 BA 70 is particularly recommended for all high performance industrial applications where high performance is required.

SYNOCURE® 9299 BA 70 MY is a hydroxy functional acrylic designed to crosslink at room temperature or forced air drying with polyisocyanates. SYNOCURE® 9299 BA 70 MY is particularly recommended for all high performance industrial applications where high performance is required.

SYNOCURE® 9422 BA 70 is an acid functional acrylic resin designed to crosslink at room temperature with epoxy resins to give high solids content isocyanate-free two-pack coating systems. Coatings based on this resin are especially suitable for protection and maintenance in areas where rapid drying, hardness and abrasion resistance are required. SYNOCURE® 9422 BA 70 has been designed to react with economic bisphenol A type epoxies and still maintain good exterior durability.

SYNOCURE® 9422 BA 70 MY is an acid functional acrylic resin designed to crosslink at room temperature with epoxy resins to give high solids content isocyanate-free two-pack coating systems. Coatings based on this resin are especially suitable for protection and maintenance in areas where rapid drying, hardness and abrasion resistance are required. SYNOCURE® 9422 BA 70 MY has been designed to react with economic bisphenol A type epoxies and still maintain good exterior durability.

SYNOCURE® 9483 S 50 is an acrylic for use in topcoats where a non-isocyanate (NISO) curing system is needed, that has exterior durability, solvent resistance, hardness, adhesion, and color retention. Used for general industrial metal, structural steel and CASE coatings

SYNOCURE® 9484 S 60 is an acrylic for use in fast dry topcoats where a non-isocyanate (NISO) ambient curing system is needed, that has exterior durability, solvent resistance, hardness, adhesion, and color retention.

SYNOCURE® 9485 S 70 is an acrylic for use in topcoats where a non-isocyanate (NISO) curing system is needed, that has exterior durability, solvent resistance, hardness, adhesion, and color retention. Long pot lie. Very high gloss. Requires primer where good corrosion resistance is needed.

SYNOLAC 0691 SD 60 is a high molecular weight thermoplastic saturated polyester, with improved resistance to crystallisation in solution with aromatic solvents. SYNOLAC 0691 SD 60 is recommended for manufacture of high reactive and elastic coil coatings top coats with good resistance to ageing, high quality base coatings with excellent mechanical properties and good chemical resistance, white enamels for collapsible tubes and spraying bottles.

SYNOLAC® 1035 X 60 is a short oil alkyd resin based on tall oil. SYNOLAC® 1035 X 60 is recommended for general purpose stoving enamels, with good mechanical properties and acid catalysed lacquers

SYNOLAC® 1133 X 60 is a short oil length alkyd resin based on fish/tung oil modified with phenolic and rosin. SYNOLAC® 1133 X 60 is recommended for fast air drying anticorrosive industrial primers, fillers and putties and primers and undercoats recoatables with nitrocellulose.

SYNOLAC® 1180 WD 70 is a long oil alkyd based on linseed oil and modified with wood oil and superphenolic resin. SYNOLAC® 1180 WD 70 is recommended for clear varnish for yacht paints and for low aromatic content paints.

SYNOLAC® 133A is a non-drying short oil alkyd based on coconut oil. Outstanding features of SYNOLAC® 133A include good gloss, good flexibility, good adhesion and non-yellowing.

SYNOLAC® 140 X 60 is a short alkyd resin based on soya oil with good reactivity, suitable for short curing oven time. SYNOLAC® 140 X 60 is recommended for general use in oven curing enamels and varnishes, nitrocellulose and acid curing lacquers.

SYNOLAC® 1421 WD 50 is a medium oil alkyd resin designed for use in decorative coatings. SYNOLAC® 1421 WD 50 is particularly adapted to the formulation of glossy varnishes and paints with a good weathering resistance. It is also convenient for fast drying anticorrosive primers formulations. It may also be used in combination with long oil alkyd resins to improve their drying.

SYNOLAC® 151 W 55 is an alkyd resin designed to be used for rapid drying coatings for ironwork, joinery and radiators and for anticorrosive paints.

SYNOLAC® 1529 BA 80 is a low viscosity, saturated, hydroxy functional polyester resin for high solids polyurethane and stoving systems. SYNOLAC® 1529 BA 80 is particularly recommended for use in high solids 2K and stoving systems in combination with relevant low viscosity cure agents. End uses for SYNOLAC® 1529 BA 80 include anticorrosive primers for industrial use, finishes for agricultural machinery and household appliances and general metal coatings. Polyurethane systems based on SYNOLAC® 1529 BA 80 achieve very high gloss levels and provide an excellent colour retention and exterior durability. Relevant coatings show a good balance of hardness, resistance to mechanical stress and flexibility, and an excellent metal adhesion. In combination with suitable melamine formaldehyde resins stoving systems with similar VOCs may be formulated for temperatures of up to 190°C. SYNOLAC® 1529 BA 80 provides good flow characteristics even at very high PVCs, making it suitable also for use in pigment pastes in modern tinting systems.

SYNOLAC® 152S-60 is a good quality, linear oil free polyester resin developed for use in nonyellowing tube coating. SYNOLAC® 152S-60 is recommended to use as sole medium in roller coating and tube coating enamels.

SYNOLAC® 153 ND 60 is an oil-free polyester. SYNOLAC® 153 ND 60 is specially designed for use in metalgraphic and industrial enamels.

SYNOLAC® 153S-60 is a high quality, extremely flexible linear oil free polyester resin developed for use in DWI can coating, collapsible tube, sheet fed metal decorating and coil coating applications.

SYNOLAC® 154S-60 is a good quality, linear oil free polyester resin developed for use in sheet fed metal decorating and coil coating applications.

SYNOLAC® 15S-60 is a medium oil alkyd resin suitable for the formulation of 2K polyurethane wood coatings. The sealers formulated with SYNOLAC® 15S-60 have good sandability, recoatability and transparency. The topcoats formulated with SYNOLAC® 15S-60 are easy to matt and have very good scratch resistance. SYNOLAC® 15S-60 has good yellowing resistance, depending on the polyisocyanate used to crosslink it.

SYNOLAC® 162 W 70 is a soya bean long oil alkyd recommended for decorative enamels and paints, white and pale shades and maintenance paints.

SYNOLAC® 1949 X 70 is a short oil length alkyd resin based on synthetic fatty acids, with excellent gloss and good compromise between drying, levelling and hiding of the sanding marks, exhibiting high yellowing resistance in combination with aliphatic polyisocyanates. SYNOLAC® 1949 X 70 is designed for high gloss two pack polyurethane varnishes and enamels for wood.

High quality air drying enamels with excellent gloss.

SYNOLAC® E 20105-65 is a saturated polyester recommended for the formulation of cost effective coil and metal packaging coating applications.

SYNOLAC® E20108-65 is a saturated polyester recommended for the formulation of cost effective coil and metal packaging coating applications.

SYNOLAC® E 20246-55 is linear oil free polyester developed for use in Coil Coating, Sheet fed metal decorating and General Industrial applications.

SYNOLAC® 2111 WD 70 is a medium oil alkyd based on non yellowing fatty acids, showing a higher film build than standard resins for car bodywork. SYNOLAC® 2111 WD 70 can be considered, in the medium oil alkyd category, as a resin designed for high solids paints. The resin is supplied in low aromatic white spirit to enable the formulation of coatings that do not require adverse environmental labelling. SYNOLAC® 2111 WD 70 shows an excellent weather resistance, keeping a permanent flexibility.

SYNOLAC® 2126 S 75 is a short oil alkyd resin modified with vegetable fatty acids intended for the formulation of clear and pigmented 2 pack polyurethane systems for furniture and wood items. It also can be used in nitrocellulose lacquers.

SYNOLAC® 267 ND 60 is an acrylic modified polyester resin. SYNOLAC® 267 ND 60 is recommended for "wet-on-wet" overprint varnishes and metal decorating enamels with good standing mechanical processing properties.

SYNOLAC® 2700 WD 70 is an air drying silicone modified isophthalic alkyd recommended for high durability exterior marine and decorative maintenance finishes. SYNOLAC® 2700 WD 70 is used as the sole binder for high durability and temperature resistant coatings on stable substrates (e.g. masonry, plasters, structural steel, exterior cladding repair coats). SYNOLAC® 2700 WD 70 can also be used, in combination with suitable alkyds or thixotropic alkyds, for high durability exterior wood coatings. It is recommended that SYNOLAC® 2700 WD 70 is used at between 45-55% of the total binder solids in order to obtain the improved durability and the flexibility necessary for wood coatings. SYNOLAC® 2700 WD 70 is supplied in low aromatic white spirit to enable the formulation of coatings that do not require adverse environmental labelling.

SYNOLAC® 271 X 60 is a fast drying, short-oil alkyd for air drying and stoving systems. SYNOLAC® 271 X 60 is universally suitable for a wide range of air drying industrial coatings, like fast drying primers, fillers, single layer coatings and finishes. In combination especially with highly reactive amino formaldehyde resins stoving systems, particularly drum coatings, may be formulated.

SYNOLAC® 272 X 60 is a fast drying, short-oil alkyd for air drying and stoving systems. SYNOLAC® 272 X 60 is universally suitable for a wide range of air drying industrial coatings, like fast drying primers, fillers, single layer coatings and finishes. In combination especially with highly reactive amino formaldehyde resins stoving systems, particularly drum coatings, may be formulated.

SYNOLAC® 27X-55 is a short oil alkyd suitable for use in industrial air drying and stoving finishes.

SYNOLAC® 2833 X 60 is a short oil length alkyd resin based on linseed/tung oil modified with phenolic and rosin. SYNOLAC® 2833 X 60 is recommended for very fast air drying industrial finishes and anticorrosive primers, primers and undercoats recoatable with nitrocellulose lacquers and hammer finishes.

SYNOLAC® 3001 is a long oil oxidising alkyd based on semidrying oil and modified with pentaerythritol. This is recommended for use in high quality non yellowing synthetic enamels having excellent gloss.

SYNOLAC® 3003-70 is a long oil oxidising alkyd based on mixed fatty acid modified with Pentaerythritol. SYNOLAC® 3003-70 is recommended for use in high quality decorative paints and air drying enamels with excellent gloss

SYNOLAC® 3132 X 75 is a short oil chain-stopped high solids alkyd suitable for use in industrial air dry, force dry and stoving finishes. SYNOLAC® 3132 X 75 is recommended for use in machinery, agricultural and transport finishes. It is equally suitable for interior and exterior applications. It can also be used in combination with conventional short or medium oil alkyds to reduce VOC.

SYNOLAC® 3133 X 74 is a high solids content alkyd/acrylic hybrid resin. SYNOLAC® 3133 X 74 is recommended for use in machinery, agricultural implement and general industrial finishes. It is equally suitable for interior and exterior application. Although coatings based on SYNOLAC® 3133 X 74 show good air-dry performance they can also be force-dried. The hybrid structure of SYNOLAC® 3133 X 74 results in improved hardening rate compared with conventional alkyd based coatings especially during the early stages after application when this is such an important feature.

SYNOLAC® 3315 BA 70 is a vegetable fatty acids modified polyester resin with resistance to chemical agents, high flexibility and adherence to the surface. Their hydroxyl groups are very reactive and react very fast with the NCO groups at room temperature. SYNOLAC® 3315 BA 70 is recommended for non yellowing polyurethane sealers and finishes for wood, varnishes and paints for boats, polyurethane paints for industrial protection and universal pigmented pastes.

SYNOLAC® 350 S 65 is an alkyd/amino resin precondensate for use in coatings with very low formaldehyde emission. It is especially mild in odour. The particular formulation of the resin allows to keep the content of free formaldehyde below 0.1% and therefore avoids the usually strong odour of emitted formaldehyde from acid curing coatings. SYNOLAC® 350 S 65 provides a good solvent release, fast curing and quick increase of surface hardness, although the lacquers based on SYNOLAC® 350 S 65 have considerably long pot life. SYNOLAC® 350 S 65 is particularly recommended for use in industrial furniture coatings, especially kitchen furniture. Moreover SYNOLAC® 350 S 65 is well suitable for fast curing, high quality parquet sealers.

SYNOLAC® 3636 BA 80 is a high solid saturated polyester resin, containing hydroxyl groups. SYNOLAC® 3636 BA 80 is recommended for two-component polyurethane varnishes and paints with excellent weather resistance, chemical resistance, high elasticity paints. It is suitable for automotive, general industry, aviation applications and for plasticizing 2 pack PU acrylic systems.

SYNOLAC® 377 BA 70 is a fatty acid modified hydroxyfunctional polyester resin based on special fatty acids, designed to crosslink with aromatic and/or aliphatic polyisocyanates for 2 pack-polyurethane coatings with excellent flexibility and adhesion. Two pack-coatings based on SYNOLAC® 377 BA 70 are especially suitable for wood finishes in the furniture industry, selecting the appropiate polyisocyanates.

SYNOLAC® 37A is an acrylated copolymer resin designed to produce fast curing finishes with good flexibility, colour retention, gloss and good tooling characteristics for the manufacture of roller coatings on metal substrates.

SYNOLAC® 40 X 60 is a styrenated short oil alkyd resin modified with dehydrated castor and soya oils. SYNOLAC® 40 X 60 is recommended for very fast air drying spraying finishes, water and mineral oil resistant finishes and primers for crankcases.

SYNOLAC® 4004-70 is a long oil oxidising alkyd based on dehydrated castor oil. This is recommended for use in stoving enamels.

SYNOLAC® 4013 WD 85 is a long oil alkyd designed for use in decorative paints and wood stains. SYNOLAC® 4013 WD 85 has been developed for the formulation of 2010 VOC compliant architectural coatings (Directive 2004/42/CED). Alone or combined with a solvent-free alkyd diluent, SYNOLAC® 4100 for instance, allows to formulate a wide range of coatings exhibiting a good hardness development. SYNOLAC® 4013 WD 85 is supplied in low aromatic white spirit to enable the formulation of coatings that do not require adverse environmental labelling.

SYNOLAC® 4060 WDA 90 is a high solids long oil alkyd resin designed for use in decorative coatings. SYNOLAC® 4060 WDA 90 has been developed to formulate a wide range of architectural coatings. Its low viscosity combined with its high solid content allows the use of thixotropic resins - such as GELKYD® - silicone-modified alkyds and urethan-modified alkyds to produce high quality, 2010 VOC compliant (Directive 2004/42/CE) decorative coatings formulations. SYNOLAC® 4060 WDA 90 is supplied in low aromatic high flash white spirit to enable the formulation of coatings that do not require adverse environmental labelling.

SYNOLAC® 4060 WP 90 is a high solids long oil alkyd resin designed for use in decorative coatings. SYNOLAC® 4060 WP 90 has been developed to formulate a wide range of architectural coatings. Its low viscosity combined with its high solid content allows the use of thixotropic resins - such as GELKYD® - silicone-modified alkyds and urethane-modified alkyds to produce high quality, 2010 VOC (Directive 2004/42/CE) compliant decorative coatings formulations. SYNOLAC® 4060 WP 90 is supplied in isoparaffinic solvent to enable the formulation of coatings that do not require adverse environmental labelling.

SYNOLAC® 4097 WD 75 is a long oil oxidising alkyd designed to formulate a wide range of 2010 VOC compliant paints and varnishes (directive 2004/42/CE). SYNOLAC® 4097 WD 75 is supplied in low aromatic white spirit to enable the formulation of coatings that do not require adverse environmental labelling.

SYNOLAC® 40X60 MY is a styrenated short oil alkyd resin modified with dehydrated castor and soya oils. SYNOLAC® 40X60 MY is recommended for very fast air drying spraying finishes, water and mineral oil resistant finishes and primers for crankcases.

SYNOLAC® 4100 is a solvent-free long oil alkyd designed for use in low VOC decorative coatings in combination with other long oil alkyds. SYNOLAC® 4100 very low viscosity and good solvency power enable the formulation of VOC 2010 compliant coatings (Directive 2004/42/CE). SYNOLAC® 4100 is a very good alkyd reactive diluent for all conventional long oil alkyd resins - modified or not - making it suitable for the formulation of topcoats, enamels, etc… Its low viscosity ensures a good penetration into porous substrates, hence it is adapted to the formulation of primers and woodstains.

SYNOLAC® 4103 WD 85 is a long oil alkyd designed for use in 2010 VOC (Directive 2004/42/CE) compliant decorative paints and woodstains. SYNOLAC® 4103 WD 85 has been specifically designed to be used in combination with SR-350 (1) - a trifunctional methacrylic monomer - for optimum hardness development. SYNOLAC® 4103 WD 85 is supplied in low aromatic white spirit to enable the formulation of coatings that do not require adverse environmental labelling.

SYNOLAC® 4200 is a solvent-free long oil alkyd designed for use in low VOC decorative coatings in combination with other long oil alkyds. SYNOLAC® 4200 very low viscosity and good solvency power enable the formulation of VOC 2010 compliant coatings (Directive 2004/42/CE). SYNOLAC® 4200 is a very good alkyd reactive diluent for all conventional long oil alkyd resins - modified or not - making it suitable for the formulation of topcoats, enamels, etc… Its low viscosity ensures a good penetration into porous substrates, hence it is adapted to the formulation of primers and woodstains.

SYNOLAC® 4210W55 is a medium oil oxidizing alkyd that produces a wide range of high quality air drying finishes. It provides an excellent combination of fast drying and toughness, together with excellent colour retention and durability.

SYNOLAC® 435 BA 70 is a semi-drying, medium-oil alkyd for nitrocellulose combination varnishes, acid curing paints and 2 K-polyurethane systems for wood coatings. SYNOLAC® 435 BA 70 is particularly recommended for use in nitrocellulose varnishes with comparatively good film build for industrial furniture finishing. SYNOLAC® 435 BA 70 provides an excellent plasticizing effect for nitrocellulose. In relevant formulations it achieves high gloss levels and a good balance of flexibility and hardness allowing the formulation of varnishes with increased levels of alkyd resin and thus improved film build. In acid curing systems SYNOLAC® 435 BA 70 shows a good reactivity and provides a good flexibility even at low temperatures. Stoving systems based on SYNOLAC® 435 BA 70 also maintain a good balance of hardness and flexibility and show a good gloss retention in exterior applications.

SYNOLAC® 463 X 60 is a short oil epoxy ester used in air drying and stoving primers and finishes for a wide variety of applications. SYNOLAC® 463 X 60 is particularly suitable for use in air drying primers where good anticorrosive properties are essential and in automobile stoving primers where high performance in terms of adhesion and chemical resistance are desirable. The use of 5% - 15% of melamine resin on total resin content will give an increased rate of cure in stoving systems. The excellent resistance of SYNOLAC® 463 X 60 to acids and alcalis can be used to advantage in air drying and stoving finishes for application by spraying. Bronze finishing is one typical air drying application and paints for bicycle frames are typical of the use made of the resin in stoving finishes.

SYNOLAC® 5001-70 is a short oil non-oxidising alkyd resin. This resin is recommended to use with amino resins for stoving enamels and plasticizing alkyd in NC lacquers.

SYNOLAC® 5014 X 60 is a short oil length chain stopped alkyd based on linoleic rich fatty acids. SYNOLAC® 5014 X 60 is recommended for the formulation of air drying industrial primers and topcoats suitable for the protection of structural steel and general industrial applications.

SYNOLAC® 5053 WD 50 is a medium oil alkyd resin for general purpose. Due to good balance between surface drying and hard drying, SYNOLAC® 5053 WD 50 is designed to formulation paints and anti corrosive paints.

SYNOLAC® 5069S-65 is a saturated polyester developed for use in coil coating, sheet fade metal decorating and general industrial applications.

SYNOLAC® 5070S-65 is a saturated polyester suitable for coil coating top coats. It gives very good adhesion and flexibility. It is designed for applications in Coil coating, sheet fade metal decorating and industrial applications.

SYNOLAC® 5085 is a solvent-free low viscosity linear saturated polyester (typical average molecular weight 1500). SYNOLAC® 5085 is a very compatible low viscosity modifier designed for blending with other systems. SYNOLAC® 5085 is suitable for use with 2-component acrylic isocyanate or polyester isocyanate systems, high quality stoving systems.

SYNOLAC® 5086 is a low viscosity linear saturated polyester with good compatibility designed for blending with other systems in order to increase solids and reduce volatile organic contents. SYNOLAC® 5086 is a highly versatile resin that can be used in diverse end-uses such as 2-component acrylic isocyanate or polyester isocyanate systems and high quality stoving systems. SYNOLAC® 5086 will react into the blended system via its high hydroxyl content, and will not compromise durability.

SYNOLAC® 5140 X 41 is a silicone modified isophthalic acid alkyd based on linseed oil recommended for fast drying coatings where a combination of heat resistance, corrosion resistance or insulating properties is required, e.g. furnaces, chimneys, electrical equipment, etc. SYNOLAC® 5140 X 41 is recommended for high quality fast drying coatings.

SYNOLAC® 51W is a medium oil oxidizing alkyd that produces a wide range of high quality air drying finishes and which can also be used for force dry and stoving finishes. It provides an excellent combination of fast drying and toughness, together with excellent colour retention and durability.

SYNOLAC® 5201 X 55 is an acrylic modified short oil alkyd resin recommended for fast air drying and low bake industrial coatings. Application and overcoating properties are exceptionally good for a resin of this type.

SYNOLAC® 5206 X 50 is an acrylic modified short oil alkyd resin recommended for very fast air dry industrial coatings. A useful feature of this resin is its very good compatibility with other film formers. It therefore offers the formulator greater choice to customise coating performance.

SYNOLAC® 5237 S 50 is a linoleic alkyd resin modified with mixed monomers. SYNOLAC® 5237 S 50 is suitable for fast air dry and force dry industrial paints. Coatings based on SYNOLAC® 5237 S 50 touch dry in 10 minutes to give high gloss, flexible and durable films. Monomer choice yields exceptional weathering properties.

SYNOLAC® 5250 X 50 is a styrenated short oil alkyd resin based on dehydrated castor oil, showing faster air drying than most of the resins of this type. SYNOLAC® 5250 X 50 has been essentially designed for the preparation of polyurethane primers. A primer based on SYNOLAC® 5250 X 50, applied by spray or dipping, can be easily recoated after 20-30 minutes after by a polyurethane lacquer without wrinkling. In addition, it allows to make paints for projectiles (negative result to the Storch-Morawski reaction) and hammered paints with good mar resistance and good hardness development. SYNOLAC® 5250 X 50 can be used for the preparation of industrial lacquers with quick drying and good resistance to fuel.

SYNOLAC® 5387 X 60 is a special epoxy ester, with a quick air drying, hardness development and a fast recoatability. This resin is essentially designed for the preparation of anticorrosive primers.

SYNOLAC® 539 BA 70 is a fatty acid modified polyester resin and designed to crosslink with aromatic and/or aliphatic polyisocyanates for two pack-polyurethane coatings with excellent flexibility and adhesion what is especially interesting for industrial wood finishing and metal.

SYNOLAC® 5402 X 60 is an short oil alkyd resin. SYNOLAC® 5402 X 60 have a remarkable fast drying and hardness development resin. It has been especially designed for fast air drying lacquers, for low temperatures (60°C-80°C) stoving lacquers and for stoving lacquers in combination with an amino resin. Moreover, it shows a good weatherability.

SYNOLAC® 5404 X 60 is an alkyd resin based on linoleic rich oil, designed to formulation air drying paints and general purpose stoving enamels.

SYNOLAC® 5512 X 60 is a short alkyd resin based on vegetable fatty acids. The flexibility is the main feature of SYNOLAC® 5512 X 60 and it is mainly used for highly pigmented 2 pack PU sealers for wood and as a plasticizer for other SYNOLAC® types, without loosing its drying and sanding properties. It also provides a very fast hardening speed in two component polyurethane varnishes.

SYNOLAC® 5576 S 65 is a short alkyd resin based on vegetable fatty acids, designed for the formulation of two pack polyurethane sealers and topcoats and nitrocellulose combinations for the furniture industry.

SYNOLAC® 5670S-55 is a saturated, aliphatic-based polyester developed for use in coil coating, sheet fade metal decorating and industrial applications.

SYNOLAC® 5670S-65 is a linear saturated polyester developed as primer resin for use in coil coating, sheet fade metal decorating and industrial applications.

SYNOLAC® 60 WD 70 is a long oil alkyd developed for use for the formulation of interior and exterior decorative paints and varnishes. SYNOLAC® 60 WD 70 is supplied in low aromatic white spirit to enable the formulation of coatings that do not require adverse environmental labelling.

SYNOLAC® 6005 WDA 70 SYNOLAC® 6005 WDA 70 is especially adapted to the formulation of exterior coatings. Primers, undercoats, glossy finishes as well as varnishes and woodstains exhibiting a very good durability can be formulated with SYNOLAC® 6005 WDA 70. SYNOLAC® 6005 WDA 70 specific polymer design ensures a very high and stable flexibility to the coating which is necessary when applied on a wooden substrate. SYNOLAC® 6005 WDA 70 is supplied in low aromatic high flash white spirit to enable the formulation of coatings that do not require adverse environmental labelling.

SYNOLAC® 606 WD 75 is a low yellowing long oil alkyd designed for use in high quality decorative and industrial topcoats. It is more specifically adapted to the formulation of interior and exterior paints. SYNOLAC® 606 WD 75 can be formulated into a range of decorative coatings that meet the 2010 VOC limits set in Directive 2004/42/CE. SYNOLAC® 606 WD 75 is supplied in low aromatic white spirit to enable the formulation of coatings that do not require adverse environmental labelling.

SYNOLAC® 655W-55 is a urethane alkyd designed for use in clear and pigmented finishes as the sole medium or in combination with long oil alkyds. Rapid drying and excellent gloss retention, together with good abrasion resistance and colour retention are achieved with paints incorporating even minor proportion of SYNOLAC® 655W-55.

SYNOLAC® 6883 is a long oil isophthalic acid based alkyd. Its very good pigment wetting properties make it suitable for use as a grinding medium and as an additive to improve the build of alkyd enamels. It can be used as a co-binder for decorative gloss paints and varnishes to improve build and extend the open time of the coating. The isophthalic backbone gives added water and saponification resistance. SYNOLAC® 6883 can be used in combination with high solid long oil alkyds in matt and satin- finish paints in order to improve the open time, build and in particular to enhance the flexibility of the film, thus avoiding the problems of cracking and peeling upon ageing.

SYNOLAC® 7025 S 50 HV is a high molecular weight short oil alkyd resin based on vegetable fatty acids designed for the formulation of 2 pack polyurethane systems. SYNOLAC® 7025 S 50 HV is a general purpose resin, with broad application field, suitable for polyurethane wood sealers and topcoats, providing fast sanding and good recoatability at low crosslinking levels.It is recommended for clear and pigmented coatings for the furniture industry.

SYNOLAC® 7035 S 55 is a high molecular weight short oil alkyd resin. SYNOLAC® 7035 S 55 is suitable for 2 pack polyurethane wood sealers providing fast drying, good sanding and excellent filling power.

SYNOLAC® 70S-50 is a high molecular weight short oil alkyd resin based on vegetable fatty acids designed for the formulation of 2 pack polyurethane systems. SYNOLAC® 70S-50 is a general purpose resin, with broad application field, suitable for polyurethane wood sealers and topcoats, providing fast sanding and good recoatability at low crosslinking levels. It is recommended for clear and pigmented coatings for the furniture industry.

SYNOLAC® 7210 X 60 is a low viscosity short oil alkyd resin based on dehydrated castor oil specially designed to be used in combination with amino resins for general purpose primers and enamels.

SYNOLAC® 72S-55 is a medium oil oxidising alkyd developed for use in a wide range of vehicle refinishing fast air-drying and stoving applications. This resin can be used in two-pack applications also.

SYNOLAC® 7312 X 60 is a short oil alkyd resin based on special fatty acids. SYNOLAC® 7312 X 60 is a polymer with a high grade of flexibility and compatibility studied in order to manufacture sealers and finishes that may be hardened mainly with isocyanurates. SYNOLAC® 7312 X 60 can be used to manufacture fast drying wood coatings with a solids content higher than 40%.

SYNOLAC® 7390 X 60 is a short alkyd resin based on saturated fatty acids. SYNOLAC® 7390 X 60 is specially designed for clear and pigmented high gloss polyurethane wood coatings. SYNOLAC® 7390 X 60 shows outstanding compromise between gloss and drying, as well as an excellent yellowing resistance in systems crosslinked with aliphatic polyisocyanates.

SYNOLAC® 75 ND 64 is a medium molecular weight linear thermoplastic saturated polyester resin. This resin is especially recommended for metallic coatings with excellent mechanical properties, allowing mechanical processing. SYNOLAC® 75 ND 64 is recommended for high quality base coatings with excellent mechanical properties, “Coil-coating” enamel and overprint varnishes.

SYNOLAC® 7500 is a long oil length, high solid, oxidising alkyd. SYNOLAC® 7500 exhibits good penetration into wooden substrates and very smooth wiping feel. It has very good gloss and flexibility.

SYNOLAC® 7503 X 60 is a short oil length alkyd on dehydrated castor oil modified with phenolic, specially designed for anticorrosive primer industrial with excellent mechanicals properties. SYNOLAC® 7503 X 60 is recommended for quick air drying primers, surfaces and finishes, petrol resistant enamels, agricultural machinery and hammer finishes.

SYNOLAC® 755 WD 60 is a medium oil length alkyd resin based on low yellowing drying acids. SYNOLAC® 755 WD 60 is recommended for decorative enamels, general purpose enamels and paints with good colour retention, gloss and good through-drying. The resin is supplied in low aromatic white spirit, thus enabling the manufacture of decorative paints with low environmental impact.

SYNOLAC® 78 W 50 is a medium oil alkyd. SYNOLAC® 78 W 50 is especially adapted to fast drying topcoats without the need for hazardous labelling, topcoat for transport finishes and fast drying decorative varnishes.

SYNOLAC® 79S-55 is a medium oil chain stopped alkyd resin based on soyabean fatty acid. SYNOLAC® 79S-55 is recommended for use in general purpose high quality air drying and force drying industrial finishes.

SYNOLAC® 8000 BA 75 is a non-drying, short oil alkyd resin particularly recommended for use in NC-combination varnishes for industrial furniture coatings applied by curtain-coating, roller or spraying. Varnishes based on SYNOLAC® 8000 BA 75 show a very fast solvent release and drying, quickly providing a good blocking resistance and sanding properties. While the resin solution of SYNOLAC® 8000 BA 75 has a good tolerance to alcohols as diluents, dry films achieve an excellent alcohol resistance. SYNOLAC® 8000 BA 75 provides a low initial colour and a good colour retention.

SYNOLAC® 8002 DBA 80 is a low viscosity aromatic free short oil alkyd resin based on castor oil specially designed to be used in combination with amino resins for general purpose high solids and low VOC primers and enamels.

SYNOLAC® 800AG is an oil-free polyester designed for coil coating applications. It is also suitable for general metal and automotive refinish coating. This resin offers excellent pigment wetting, strong adhesion, and flexibility, while remaining a tough film. SYNOLAC® 800AG is frequently used in automotive refinish for both solid color pigmented basecoat and metallic basecoat. It is being used together with CAB, which accelerates drying time and enhances the metallic effect of the coatings.

SYNOLAC® 8021 X 70 is a short oil high solid air drying alkyd.

SYNOLAC® 8026 X 60 is a short oil alkyd resin based on soya rich oil, designed for the formulation of nitrocellulose lacquers and varnishes, very fast drying sealers, fillers and primers with easy sanding, very fast air drying varnishes and paints, two pack polyurethane lacquers and general purpose stoving enamels.

SYNOLAC® 8031 S 75 is a short oil alkyd designed for use with nitrocellulose in aromatic-free nitrocellulose wood lacquers and with urea-formaldehyde and melamine-formaldehyde resins in high solids acid catalysed varnishes. SYNOLAC® 8031 S 75 provides an excellent plasticizing effect for nitrocellulose. The nitrocellulose lacquers based on SYNOLAC® 8031 S 75 show good film build and a good balance of flexibility and hardness.

SYNOLAC® 8035 X 60 is a short oil alkyd resin for air drying topcoats with a good exterior durability, quick-drying sealers and low temperature baking primers and topcoats in combination with urea formol resins

SYNOLAC® 8036 BA 75 is a short oil alkyd resin modified with vegetable fatty acids. SYNOLAC® 8036 BA 75 is a general purpose resin designed for the formulation of fast drying nitrocellulose lacquers, acid curing systems with long pot life and stoving paints.

SYNOLAC® 8049 S 55 is a fast drying medium oil alkyd resin based on colour retentive fatty acids. SYNOLAC® 8049 S 55 can be used preferably as air drying single layer and topcoats, e.g., for machinery paints, transport finishes and general industrial paints.The through drying and gloss can be improved by combination with hard resins (e.g. maleic resins).

SYNOLAC® 810AG is an oil-free polyester developed for quality finishes for metal decorating and coil coating applications. It has excellent flexibility and good deep drawn property for metalgraphic and industrial packaging coatings application.

SYNOLAC® 8236 X 55 is a short oil epoxy ester used in air drying and stoving primers and finishes for a wide variety of applications.

SYNOLAC® 8250 X 60 is a styrenated short oil soya alkyd resin. SYNOLAC® 8250 X 60 is recommended for very fast air drying spraying finishes, paints with good resistance to water and mineral oils and primers for crankcases.

SYNOLAC® 8298 WD 60 is a phenolic modified chinawood oil. SYNOLAC® 8298 WD60 is supplied in low aromatic white spirit to enable the formulation of coatings that do not require adverse environmental labelling. SYNOLAC® 8298 WD60 can be formulated into a range of decorative and marine paints.

SYNOLAC® 82X-70 is a short oil oxidising alkyd developed for use in a wide range of industrial; vehicle refinishing fast air-drying and stoving applications. This resin can be used in two-pack applications.

SYNOLAC® 8465 X 60 is a short oil alkyd resin based on special fatty acids designed for sealers and topcoats for wood, crosslinked with isocyanates for the furniture industry. SYNOLAC® 8465 X 60 is recommended for the formulation of 2 pack isocyanate curing systems with fast solvent release and very good levelling. It is suitable for the formulation of all kind of finishes, either mat or glossy, providing excellent hardness and mar resistance.

SYNOLAC® 8467 DBA 75 is a medium oil alkyd resin suitable for the formulation of 2K polyurethane wood coatings. SYNOLAC® 8467 DBA 75 contains less than 1% of aromatic hydrocarbons. The sealers formulated with SYNOLAC® 8467 DBA 75 have good sandability, recoatability and transparency. The topcoats formulated with SYNOLAC® 8467 DBA 75 are easy to matt and have very good scratch resistance. SYNOLAC® 8467 DBA 75 has good yellowing resistance, depending on the polyisocyanate used to crosslink it.

SYNOLAC® 9002-60 is a medium oil alkyd resin based on semidrying oil and made in combination with glycerol. SYNOLAC® 9002-60 is recommended to use as sole medium in roller coating and tube coating enamels.

SYNOLAC® 926 X 60 HV is a short oil alkyd resin based on soya rich oil, designed to formulation nitrocellulose lacquers and varnishes, very fast drying sealers, fillers and primers with easy sanding, very fast air drying varnishes and paints as two pack polyurethane lacquers and general purpose stoving enamels.

SYNOLAC® 92X-55 is a short oil oxidising alkyd developed for use in a wide range of vehicle refinishing fast air-drying and stoving applications.

SYNOLAC® 93X-70 is a short oil oxidising alkyd developed for use in a wide range of industrial; vehicle refinishing, fast air-drying and stoving applications.

SYNOLAC® 947 X 65 is a medium non yellowing drying oil alkyd resin. SYNOLAC® 947 X 65 is recommended for fast air and forced drying industrial paints, finishing paints for carbodies and fast drying synthetic enamels.

SYNOLAC® 9605 S 65 is a saturated polyester recommended for the coil coating industry for cost effective backers and exterior topcoats.

SYNOLAC® 9605S65 MY is a saturated polyester recommended for the coil coating industry for cost effective backers and exterior topcoats.

SYNOLAC® 9608 S 65 is a saturated polyester recommended for the formulation of high quality and cost effective backers for coil coating applications.

SYNOLAC® 9635 SD 65 is a saturated, aliphatic-based polyester recommended for the formulation of highly durable coil coatings destined for extensive exterior exposure under harsh climatic conditions.

SYNOLAC® 9640 S 65 is a saturated polyester recommended for the formulation of chrome-free or chromated primers for coil coating applications.

SYNOLAC® 9645S55 is a linear oil free polyester developed for use in Coil Coating, sheet fed Metal Decorating and General Industrial applications.

SYNOLAC® 9647 N 70 is a saturated polyester recommended for the formulation of high yield chromated and chrome-free primers for coil coating applications.

SYNOLAC® 9658 S 76 is a high solids oil free polyester for coil coating top coat application and specially designed to achieve a potential saving of 15 % in yield in term of coverage comparing to standard oil free polyester.

SYNOLAC® 9666 S 70 is a saturated polyester recommended used in the coil coating industry for cost effective backers and exterior topcoats.

SYNOLAC® 9669 S 66 is a saturated polyester recommended for the formulation of coil coatings.

SYNOLAC® 9675 S 65 is specially designed for use in exterior can coating primer with excellent adhesion and flexibility on various substrates.

SYNOLAC® 9677 S 50 is an oil free polyester for can coating application. SYNOLAC® 9677 S 50 is specially designed for use in metallographic white base coat and OPV enamels.

SYNOLAC® 9688S65 MY is a saturated, aliphatic-based polyester recommended for the formulation of highly durable coil coatings destined for extensive exterior exposure under harsh climatic conditions.

SYNOLAC® 9689 SD 65 is a cycloaliphatic oil free polyester for coil coating application. SYNOLAC® 9689 SD 65 is specially designed to be used in top coat formulation with very good external durability offering better coverage on coil coating lines.

SYNOLAC® 9770 BA 80 is a slightly branched saturated polyester resin, containing hydroxyl groups. SYNOLAC® 9770 BA 80 is recommended for two-component polyurethane varnishes and paints with excellent weather resistance, light and chalking stability, high elasticity paints and varnishes, polyester elastifier and paints for use on plastic materials.

SYNOLAC® E20245 is a saturated polyester resin for can, coil, industrial coatings. E 20245 is mainly used for stoving enamels in combination with amino resins.

SYNOLAC® E4296 is a linear oil free polyester developed for use in Coil Coating, sheet fed Metal Decorating and General Industrial applications.

SYNOLAC® K32X is short oil, non-drying alkyd resin recommended to be used as plasticizer in nitro-cellulose lacquers. In conjunction with proper amino resins, acid curing lacquers with good pot-life, cold check resistance and non-yellowing properties can be formulated. It is also recommended to be used as non-yellowing stoving enamel.

SYNOLAC® N28X is short oil, non-drying resin based on saturated fatty acids. It is well fitted as a plasticizing resin in nitrocellulose finishes. It is also designed for polyurethane and acid curing where excellent body and film aspect is desired.

SYNOLAC® N32BA70 is short oil, non-drying resin based on saturated fatty acids. It is well fitted as a backbone resin in acid curing, polyurethane and nitrocellulose finishes where excellent colour and colour stability is desired. Very good wet heat resistance can be attained when formulated with relevant amino resins.

SYNOLAC® N32X is short oil, non-drying resin based on saturated fatty acids. It is well fitted as a backbone resin in acid curing, polyurethane and nitrocellulose finishes where excellent colour and colour stability is desired. Very good wet heat resistance can be attained when formulated with relevant amino resins.

SYNOLAC® N33X is short oil, non-drying resin based on saturated fatty acids. It is well fitted as a backbone resin in acid curing, polyurethane and nitrocellulose finishes where excellent colour and colour stability is desired. Very good wet heat resistance can be attained when formulated with relevant amino resins.

SYNOLAC® N36BA80 is short oil, non-drying resin based on saturated fatty acids. It is well fitted as a backbone resin in polyurethane, acid curing and nitrocellulose finishes where excellent colour and colour stability is desired.

SYNOLAC® N36X is short oil, non-drying resin based on saturated fatty acids. It is well fitted as a backbone resin in acid curing and nitrocellulose finishes where excellent colour and colour stability is desired. Very good wet heat resistance can be attained when formulated with relevant amino resins.

SYNOLAC® O21NBg is a saturated polyester recommended for the coil coating industry for cost effective backers and exterior topcoats.

SYNOLAC® O3X is a branched polyester for use in combination with amino resins and/or prepolymerised isocyanate resins in high quality stoving enamels. SYNOLAC® O3X has good adhesion to metal substrates such as steel, tin, and aluminium.

SYNOLAC® O7X is branched polyester for use in combination with amino resins. SYNOLAC® O7X has good exterior durability, mechanical properties, gloss and gloss retention. The inter-coat adhesion is very good and SYNOLAC® O7X shows little yellowing when over-baked.

SYNOLAC® P20X70 is a non-drying short oil alkyd resin mainly recommended to be used as plasticizer in nitro-cellulose lacquers. In conjunction with proper amino resins, also fitted as a backbone resin for acid curing lacquers with good pot-life, good gloss and hardness. With proper formulation, it is also can be used as stoving enamel.

SYNOLAC® P33X70 is an economical non-drying short oil alkyd resin. In conjunction with proper amino resins, acid curing lacquers with good pot-life, cold check resistance and non-yellowing properties can be formulated. It is also recommended to be used as non-yellowing stoving enamel.

SYNOLAC® PT30X is a short oil, phenolic modified, drying alkyd designed for industrials air-drying and stoving primers. SYNOLAC® PT30X dries rapidly to hard, but flexible films with excellent adhesion and corrosion resistance. Under normal conditions, there are no critical periods concerning lifting from strong solvents.

SYNOLAC® S30X is a chained stopped, short oil drying alkyd resin based on TMP. It produces fast drying paints and primers with good adhesion to metal substrates. This resin also provides excellent intercoat adhesion.

SYNOLAC® S39X70 is a semi drying short oil alkyd resin. It can be used as plasticizing resin in NC paint. In conjunction with proper amino resins, acid curing lacquers with good pot-life and cold check resistance properties can be formulated.

SYNOLAC® S42X(M) is a chain stopped, short oil drying alkyd resin. It produces fast drying paints and lacquers which able to achieve a good hardness in a very short time.

SYNOLAC® S43X(M) is used mainly in white and pale coloured stoving finishes for metal. It is also used as primer as well as undercoat and finishing coat, usually in combination with suitable amino resins.

SYNOLAC® S53W60 is a medium oil, air drying alkyd intended for industrial paints with good colour retention. It can be used equally well both indoor and outdoor. It is most suitable for use in spraying paints, but can also be easily formulated to suit paints for application by brush.

SYNOLAC® S63 is a long oil oxidizing alkyd develops for use in all decorative and marine paints/varnishes.

SYNOLAC® S63BM2 is a long oil oxidizing alkyd develops for use in all decorative and marine paints/varnishes. It is most suitable for application by brush. SYNOLAC® S63BM2 is recommended for use in making all colors of decorative finishes exterior architecture, marine paints in heavy duty coatings.

SYNOLAC® T36X70 is short oil, semi-drying alkyd resin intended for use in acid curing systems. Used with proper amino resins, the system will provide good cold-check, chemical and wet heat resistance.

SYNOLAC® T49MP is semi-drying alkyd resin. Used in conjunction with suitable amino resins, high solids acid curing finishes with low aromatic solvents can easily be formulated. System based on SYNOLAC® T49MP give high film build, good stackability and good chemical and wet heat resistance.

SYNOLAC® T62 is a long oil oxidizing alkyd develops for use in all decorative and marine paints/varnishes.