A-Z index

GELKYD® 320 WD 50 is a strong gel polyamide modified thixotropic alkyd for use in all types of decorative coatings. It has a reduced odour, is to be used as a co-binder and exhibits a very rapid recovery of structure after shearing. GELKYD® 320 WD 50 has been designed for use in smooth or stippled semi-gloss paints depending on the choice of the Newtonian resin as well as gloss paints and all undercoats.

GELKYD® 352 WD 54 is a strong gel polyamide modified thixotropic alkyd for use in all types of decorative coatings. The resin is supplied in low aromatic white spirit to enable the formulation of coatings that do not require adverse environmental labelling. GELKYD® 352 WD 54 has been developed for use in the formulation of high quality decorative interior and exterior finishes. When blended with suitable alkyds, GELKYD® 352 WD 54 can be used to produce 2010 compliant coatings with a wide range of structures, from strong gel to creamy consistency. GELKYD® 352 WD 54 has no adverse effect on drying and as it is very clear, it is especially suitable for dark shades paints.

GELKYD® 367 WD 65 is a medium gel polyamide modified thixotropic alkyd for use in all types of decorative coatings. The resin is supplied in low aromatic white spirit to enable the formulation of coatings that do not require adverse environmental labelling. GELKYD® 367 WD 65 is especially suitable for formulation of thixotropic paints that meet the 2010 VOC requirements of European Directive 2004/42/C and has been developed for use in the formulation of high quality decorative interior and exterior finishes. When blended with suitable alkyds,GELKYD® 367 WD 65 can be used to produce coatings with a wide range of structures, from medium gel to creamy consistency.

GELKYD® 4635 WD 51 is a soft gel polyamide modified thixotropic alkyd for use in all types of decorative coatings. It has a reduced odour, is to be used as a co-binder for medium and long-oil alkyd resins. As it is a highly condensed resin, it prevents the penetration of the formulation into porous substrates. It is very efficient for wetting pigments and fillers. GELKYD® 4635 WD 51 has been designed for use in matt and satin-finish paints.

GELKYD® 4648 WD 80 is a high solids polyamide modified thixotropic alkyd for use in all types of decorative coatings. GELKYD® 4648 WD 80 is especially suitable for formulation of thixotropic paints that meet the 2010 VOC limits set in European Directive 2004/42/CE : formulated as sole binder, it allows the formulation of paints with a VOC lower than 300 g/l. Supplied in low aromatic white spirit, GELKYD® 4648 WD 80 enables the formulation of coatings that do not require adverse environmental labelling and has been developed for use in the formulation of high quality decorative interior and exterior finishes. When blended with suitable high solids alkyds, GELKYD® 4648 WD 80 can be used to produce media with a wide range of structures, from strong gel to creamy consistency, depending on the mixing ratio.

Graphistrength^® multi walled carbon nanotubes significantly improve the mechanical strength of composites. Dispersed in a thermoplastic, thermoset or elastomer polymer matrix, Graphistrength^® helps to achieve remarkable electrostatic dissipation (ESD) properties at very low concentration rates compared to the fillers and additives traditionally used.