SYNAQUA® 3510 SW 80
Product overview
SYNAQUA 3510 SW 80 is an after neutralisation water-reducible, saturated, hydroxyfunctional, modified polyester, designed especially for cross-linking with water emulsifiable polyisocyanates.Finished coatings particularly show an excellent film surface comparable with the well-known quality of solvent based 2K-PU coatings. Additionally the mechanical characteristics and durability are also comparable. SYNAQUA 3510 SW 80 is suitable to formulate high gloss, flexible finish coatings with less than 5% VOC. Favourably such paints can safely be worked on all commonly used modern coating equipment.SYNAQUA 3510 SW 80 is particularly recommended for use in high gloss 2-pack-coatings for industrial application. It is also suitable for primers and single coat paints. The high durability and long pot life give the opportunity for coating large vehicles. Even for wood coating these characteristics can be exploited using corresponding formulations.
Industrial segment | General Industry / ACE, Industrial Wood Finishes, Protective coatings & Marine |
Coating layers | Pigmented primer, Pigmented topcoat, Primer, Topcoat |
Curing type | 1K stoving, 2K |
Performance benefits | Chemical resistance, Corrosion protection, Flexibility |
Sustainability benefits | Low VOC, Renewable content |
Viscosity | 15 000 - 25 000 mPa.s (23°C) |
OH on solids | 3% |
Volatile | Dipropylene glycol dimethyl ether |
Color (max) | 10 Iodine |
Acid value on solids (mg KOH/g) | 53 - 58 |